# Doppler upgrade CLI on raspberry pi not working **URL:** \ **Category:** Need Help\ **Created:** [November 24, 2021, 10:15am UTC](https://community.doppler.com/t/doppler-upgrade-cli-on-raspberry-pi-not-working/434 "2021-11-24T10:15:56Z")\ **Posts on this page:** 10\ **Page:** 1
**Author:** ![sreenihari](https://sea2.discourse-cdn.com/flex016/user_avatar/community.doppler.com/sreenihari/32/292_2.png) [@sreenihari](https://community.doppler.com/u/sreenihari)\ **Post date:** [November 24, 2021, 10:15am UTC](https://community.doppler.com/t/doppler-upgrade-cli-on-raspberry-pi-not-working/434/1 "2021-11-24T10:15:56Z")
Unable to update doppler on raspberry pi for some reason i dont understand Followed installation steps of Debian/Ubuntu @ > **[Installation](https://docs.doppler.com/docs/enclave-installation)** > > reading time 4 mins ✘ pi@piworker  ~  uname -a Linux piworker 5.10.63-v7+ #1459 SMP Wed Oct 6 16:41:10 BST 2021 armv7l GNU/Linux ✘ pi@piworker  ~  doppler --version v3.34.1 pi@piworker  ~  sudo doppler update Updating… Unable to install the latest Doppler CLI Doppler Error: exit status 1 ---
**Author:** ![watsonian](https://sea2.discourse-cdn.com/flex016/user_avatar/community.doppler.com/watsonian/32/267_2.png) [@watsonian](https://community.doppler.com/u/watsonian)\ **Post date:** [November 24, 2021, 6:15pm UTC](https://community.doppler.com/t/doppler-upgrade-cli-on-raspberry-pi-not-working/434/2 "2021-11-24T18:15:41Z")
Hi there! Could you try performing the update with the `--debug` flag enabled and post the output you get? Thanks! -Joel ---
**Author:** ![sreenihari](https://sea2.discourse-cdn.com/flex016/user_avatar/community.doppler.com/sreenihari/32/292_2.png) [@sreenihari](https://community.doppler.com/u/sreenihari)\ **Post date:** [December 2, 2021, 5:28am UTC](https://community.doppler.com/t/doppler-upgrade-cli-on-raspberry-pi-not-working/434/3 "2021-12-02T05:28:30Z")
Sorry i had to paste as image as it complained for text ![image](https://us1.discourse-cdn.com/flex016/uploads/doppler/original/1X/727a5dd05e702f02ff4309f9bb13645b68d14ca5.png) ---
**Author:** ![watsonian](https://sea2.discourse-cdn.com/flex016/user_avatar/community.doppler.com/watsonian/32/267_2.png) [@watsonian](https://community.doppler.com/u/watsonian)\ **Post date:** [December 6, 2021, 6:02pm UTC](https://community.doppler.com/t/doppler-upgrade-cli-on-raspberry-pi-not-working/434/4 "2021-12-06T18:02:52Z")
Interesting! It looks like we might need to update the `install.sh` script to recognize that arch since it seems like it should fit under `arm7`. Could you run a couple more commands for me and give me the output? - `uname -m` - `arch` ---
**Author:** ![watsonian](https://sea2.discourse-cdn.com/flex016/user_avatar/community.doppler.com/watsonian/32/267_2.png) [@watsonian](https://community.doppler.com/u/watsonian)\ **Post date:** [December 6, 2021, 6:30pm UTC](https://community.doppler.com/t/doppler-upgrade-cli-on-raspberry-pi-not-working/434/5 "2021-12-06T18:30:41Z")
Actually, looking at this again, it did detect `armv7` as the arch, but it looks like the deb might have issues (also, I realized you had already provided `uname -a`). How did you initially install the Doppler CLI on your pi? Was it using the `install.sh` script? Or via package manager? One more thing that might be useful here: - `dpkg --print-architecture` It looks like pi’s will print the expected arch in `uname -m`, but `dpkg` sees the arch as `armhf`, so you end up with a mismatch like this. ---
**Author:** ![watsonian](https://sea2.discourse-cdn.com/flex016/user_avatar/community.doppler.com/watsonian/32/267_2.png) [@watsonian](https://community.doppler.com/u/watsonian)\ **Post date:** [December 6, 2021, 6:34pm UTC](https://community.doppler.com/t/doppler-upgrade-cli-on-raspberry-pi-not-working/434/6 "2021-12-06T18:34:36Z")
An additional follow-up, it looks like you might be able to solve this by running the following on your pi: ```auto sudo dpkg --add-architecture armv7l ``` Can you give it a shot and see if that allows the script to complete successfully? ---
**Author:** ![sreenihari](https://sea2.discourse-cdn.com/flex016/user_avatar/community.doppler.com/sreenihari/32/292_2.png) [@sreenihari](https://community.doppler.com/u/sreenihari)\ **Post date:** [December 7, 2021, 1:59am UTC](https://community.doppler.com/t/doppler-upgrade-cli-on-raspberry-pi-not-working/434/7 "2021-12-07T01:59:49Z")
Here you go . Couldnt add armv71 using command below. It fails ➜ ~ uname -m armv7l ➜ ~ arch armv7l ➜ ~ dpkg --print-architecture armhf ➜ ~ sudo dpkg --add-architecture armv7l pkg-config-dpkghook: warning: Architecture armv7l not defined in architecture tables, ignored ➜ ~ dpkg --print-architecture armhf I used the debian way to install as per > **[Installing the Doppler CLI](https://docs.doppler.com/docs/install-cli)** > > Install the Doppler CLI in local development and production environments. ---
**Author:** ![watsonian](https://sea2.discourse-cdn.com/flex016/user_avatar/community.doppler.com/watsonian/32/267_2.png) [@watsonian](https://community.doppler.com/u/watsonian)\ **Post date:** [December 7, 2021, 7:36pm UTC](https://community.doppler.com/t/doppler-upgrade-cli-on-raspberry-pi-not-working/434/8 "2021-12-07T19:36:56Z")
> I used the debian way to install as per In that case, you should upgrade via the package manager by doing something like: ```auto sudo apt-get update && sudo apt-get install doppler ``` Does that work? Either way, I’m still interested in figuring out how we might be able to fix this since I can imagine someone might want to install Doppler on a Pi without using the package manager. Could you give me some more details about Raspberry Pi you’re using? Could you also send me the output from `cat /etc/os-release`? ---
**Author:** ![sreenihari](https://sea2.discourse-cdn.com/flex016/user_avatar/community.doppler.com/sreenihari/32/292_2.png) [@sreenihari](https://community.doppler.com/u/sreenihari)\ **Post date:** [December 9, 2021, 7:05am UTC](https://community.doppler.com/t/doppler-upgrade-cli-on-raspberry-pi-not-working/434/9 "2021-12-09T07:05:40Z")
I did apt get remove and did a fresh install and it worked. So when a new version comes out we have to see if this issue happens again ![image](https://us1.discourse-cdn.com/flex016/uploads/doppler/original/1X/258ba579e1fb96957ee6aa9c11d7f6715131d82a.png) ---
**Author:** ![watsonian](https://sea2.discourse-cdn.com/flex016/user_avatar/community.doppler.com/watsonian/32/267_2.png) [@watsonian](https://community.doppler.com/u/watsonian)\ **Post date:** [December 13, 2021, 4:23pm UTC](https://community.doppler.com/t/doppler-upgrade-cli-on-raspberry-pi-not-working/434/10 "2021-12-13T16:23:21Z")
Great! Looking forward to hearing whether an apt upgrade works on the next release. I’ve also ordered a Raspberry Pi to do some testing with myself in the future.