# Doppler CLI Error: No Access to Any Projects - Troubleshooting Assistance Needed"

**URL:** <https://community.doppler.com/t/doppler-cli-error-no-access-to-any-projects-troubleshooting-assistance-needed/1293>\
**Category:** Discussions\
**Created:** [August 7, 2023, 9:08pm UTC](https://community.doppler.com/t/doppler-cli-error-no-access-to-any-projects-troubleshooting-assistance-needed/1293 "2023-08-07T21:08:09Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Benjamin\_Moskovitz](https://sea2.discourse-cdn.com/flex016/user_avatar/community.doppler.com/benjamin_moskovitz/32/865_2.png) [@Benjamin\_Moskovitz](https://community.doppler.com/u/Benjamin_Moskovitz)\
**Post date:** [August 7, 2023, 9:08pm UTC](https://community.doppler.com/t/doppler-cli-error-no-access-to-any-projects-troubleshooting-assistance-needed/1293/1 "2023-08-07T21:08:09Z")

</div>

"Hi all,

I’ve been facing a perplexing issue with the Doppler CLI while working on the ‘ni-be-services’ project. Although I’ve successfully set up my project and secrets, I’m consistently receiving the error message ‘Doppler Error: Could not find requested project ‘ni-be-services’.’

To provide some context, I am using a Doppler Service Token for restricted secrets access in a live environment. I have verified the project name, tokens, and configurations multiple times. I even attempted to uninstall and reinstall the CLI and run different setup commands without success.

The most puzzling part is that the error message indicates that I do not have access to any projects, despite using the proper credentials and setup.

I’m at a loss and would greatly appreciate any insights or guidance from the community on what might be causing this issue or how to resolve it. Here’s the error message for reference:

vbnetCopy code

```auto
Unable to fetch configs
Doppler Error: Could not find requested project 'ni-be-services'

```

Thank you in advance for your assistance."

---

<div class="post-metadata">

**Author:** ![watsonian](https://sea2.discourse-cdn.com/flex016/user_avatar/community.doppler.com/watsonian/32/267_2.png) [@watsonian](https://community.doppler.com/u/watsonian)\
**Post date:** [August 7, 2023, 9:15pm UTC](https://community.doppler.com/t/doppler-cli-error-no-access-to-any-projects-troubleshooting-assistance-needed/1293/2 "2023-08-07T21:15:01Z")

</div>

Hi @Benjamin_Moskovitz!

Most likely the issue here is that a Service Token is being used that’s restricted to a single project and config. What I’d recommend is performing a CLI reset by running:

```shell
doppler configure reset

```

That will remove any CLI configuration or setup you had done previously. Also, make sure you run `unset DOPPLER_TOKEN` to make sure there isn’t a token set in your environment.

After that, run `doppler login` and login normally. Immediately after doing that, try running `doppler secrets --only-names -p ni-be-services -c dev` and you should see your secrets printed. When setting up in project directories, you’ll want to run `doppler setup` rather than `doppler login` . Typically, you’ll only want an additional `doppler login` scoped to a specific directory if you have multiple workplaces you’re authenticating with.

Give that a shot and let me know if it helps!

Regards,  
-Joel